Safety Information

⚠️ WARNING: Risk of Electrical shock. Only authorised installers should open electrical control boxes contained within or for the control of this product.

⚠️ WARNING: Do not exceed the weight capacity stated for each product or component. Failure to do so can result in serious personal injury or damage to the equipment.

⚠️ It is the installer's responsibility to ensure that any structure that the product or component supplied is to be fixed to is of adequate structural strength before installation. Failure to do so can result in serious personal injury or damage to the equipment. It is recommended that the structure being fixed to can support a weight 5x the weight of the component plus and final equipment being mounted to the component.

⚠️ WARNINGS:

Read all technical instructions fully before installation and use. It is the installer’s responsibility to ensure that all documentation is passed on to the end user and read fully before operation.
Keep all documentation.
Heed all warnings.
Follow all technical specifications and instructions during installation.
Do not use near water unless the product has been specifically designed to do so.
Clean only with a dry cloth. Where the unit contains a mirror read and adhere to the Mirror Cleaning Guide
Do not defeat the purpose of the polarized or grounding-type plug. A polarized plug has two blades, one wider than the other. A grounding-type plug has two blades and a grounding prong. The wide blade or third prong is provided for your safety. If the provided plug does not fit your outlet, consult an electrician or contact the manufacturer.
Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where the exit from the apparatus.
Unplug the apparatus during lightning storms or when unused for long periods of time. 10. Only use attachments/accessories specified by the manufacturer.
Refer all servicing to qualified personnel. Servicing is required regularly on an annual basis when the apparatus is damaged in any way, liquid has been spilt or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
To completely disconnect the apparatus from the AC mains, disconnect the power cord plug from the AC receptacle on the power control box.
To prevent overheating, do not cover the apparatus. Install following the instructions.
No naked flames such as lit candles should be placed on the unit.
Observe and follow the local regulations when disposing of batteries.
Do not expose the unit to dripping or splashing fluids.
Do not place objects filled with liquid, such as vases, on the unit.
Do not expose the batteries to excessive heat such as sunshine, fire or the like.
For all mounted apparatus, the apparatus should be installed on solid wood, bricks, concrete or solid wood columns and battens.
Always turn off power at the source before putting on or taking off parts and cleaning.
Do not use outdoors unless marked for outdoor use.
Exceeding the weight capacity can result in serious personal injury or damage to equipment.
The Unit is supplied with an E-Stop Safety loop. It is the installer's responsibility to carry out a design and usage risk assessment to see if safety mechanisms are required in the particular place of application of installation. If required these should be fitted into the volt Free Safety input.