IP Control

• The Dynamic Commander
• Mask Position Logic
• RS232 Control
• IP Control
• Protocol
• Command - Help
• Command - Reset
• Command - Stop
• Command - Home
• Command - Install
• Command - Closed
• Command - Aspect
• Command - Status
• Command - Artmask
• Command - Move Mask
• Command - Preset Recall
• Command - Preset Save
• FAQ's

IP Communication Settings

The controller is configured for DHCP out of the box.

The IP interface is configured as a TCP Server on port 20108 by default. If required the port can be updated on the web setup page. To access the web setup, enter the IP address of the controller into a web browser. The default username / password is admin / admin.